I got it working! I can confirm that upgrading the firmware with Windows seems to have fixed the issue. Thanks for the tip! You might also be interested to know that I figured out how to modify th...
I got it working! I can confirm that upgrading the firmware with Windows seems to have fixed the issue. Thanks for the tip! You might also be interested to know that I figured out how to modify th...
Okay, I've finally had some success! For anyone who comes across this post later, here's what I had to do: You must make the change above to both sides of the connector. The module gets insta...
Okay, I'll give the upgrade a try on Windows tonight.
Hi there. I recently got my Roll-Up Windows Controller installed and noticed that the key fob "Lock" and "Unlock" button behavior was reversed. I saw the WS6-RF-v105 firmware update that sounds li...
Hey there, sorry to bump, but I didn't get a response and I still need some help. I was wondering if you might be able to tell me: Which door should this be installed in for RHD cars? Which pin...
Okay, I've had a look at the connector on my car, and while it has the correct number of pins, it seems to be the mirror image of what I need: This makes me wonder if I made a mistake by trying ...
Okay, no worries, thanks for the info. I'll comment back here once I've check what connector the car has. In any case, this is the harness I recieved:
Hey there. I recently picked up the windows controller for RF (with the control cable in a single kit) for my 2022 RF GT RS. I live in Australia and didn't think to check if that version of the con...