Installing BlackVue DR750S Dashcam

Installation of a dashcam is usually a simple process, with some hassle of routing the power cable under the plastic trim.  In most cases the camera power cord simply plugs into the ACC outlet.

I decided to go with an alternative way of direct connection to the rear view mirror cable. The rear view mirror cable has constant power as well as a switched line, which is perfect for powering a dashcam. In order to make a true Plug-n-Play setup, I made a little harness with a short cable to power the dashcam. BlackVue cameras are powered by 12-24V power source, so no extra power conversion is needed.

cableThis cable is hidden behind the rear view mirror; makes the whole setup super easy and neat.

camera-front

Next idea is to add a little circuit, to enable parking mode recoding. Functioning will be the same as BlackVue Power Magic Pro box, but integrated with my harness. Work in progress..

pmp_web-img500x500.jpgA few thoughts about the Power Magic Pro. I think it is a bit of an overkill for the Miata. We don’t need 24V range switches. Also the selection of the two cutoff voltages is a little strange. The 12V (+/- 0.1V) setting would create a deep discharge of the battery, and in cold weather might be impossible to start the car after this. The 12.5V (+/-0.1V) setting will provide a short time for recording. Timer feature seems useless. There are many reviews stating this product is not very reliable. My idea for this device is to use an analog circuit with cutoff at 12.2V (+/- 20mV), with a slight temperature compensation (12.4V at -35C and 12.0V at 60C).  I can fit this into an 8mm x 17mm board, which will be perfect for this harness…

board

Why I chose BlackVue brand? I was visiting South Korea for business, near Gasan Digital station. My office was on the 7th floor inside a multi building complex. One day I took the wrong elevator from the underground cafeteria, and ended up on the 7th floor, which is occupied by BlackVue company. So, I decided to check their product and see what I could do with it. I will add their cameras to my store together with my special harness.

3 thoughts on “Installing BlackVue DR750S Dashcam

  1. Looking forward to seeing your progress on integrating the parking mode. This is the exact camera I’ve been thinking about purchasing. I have been putting off installing a hardwire kit due to having to pull so much trim. Good luck and I’m hoping for good results.

    Like

Leave a Reply to Joris Mans Cancel reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s